Skip to content
Shop Our Categories
Shop by category
Stains & Finishes
Cleaners & Strippers
Exterior Stains & Finishes
Interior Stains & Finishes
Lifetime Wood Treatment
Primers & Sealers
Silicone Roof Coating
Acrylic Elastomeric Roof Coating
Aluminum Roof Coating
Roof Patch & Sealants
Stains & Finishes
Messmers UV Plus Deck Stain Wood Stain - 5 Gallon
Click to view another Color
Clear Weathering 499
Natural Cedar 502
Natural Pine / Fir 501
Natural Redwood 503
Natural Sequoia 504
Messmer's UV Plus is a penetrating wood deck stain and oil finish that beautifies and protects exterior wood, providing a natural appearance. It is ideal for use on cedar, pine, redwood, and pressure treated wood and comes in a variety of tones and semi-transparent colors. It does not form a surface film when properly applied and is not subject to peeling and flaking.
Messmer's UV Plus allows you to protect and beautify your wood while maintaining a natural appearance. It will change the color of the wood but not the texture, and will not obscure the natural wood grain. Colors range from lightly pigmented toners to semitransparent stains.
Product Weight: 50 lbs
Manufacturer: Messmers, Inc
Always clean gray or dirty wood before applying UV Plus. Use Messmer’s WD Wood and Deck Renewer available in liquid and powder concentrates. Allow wood to completely dry for at least 24 to 48 hours. Previously stained or treated wood should be sufficiently weathered to allow for complete penetration of U.V. Plus. New redwood should be aged at least 6-8 weeks and cleaned before applying product.
Before applying, this product should be mixed thoroughly. Ensure that all settled material on bottom of can is evenly incorporated and intermix all containers (box them). Apply UV Plus when surface temperatures are between 45F and 90F. If surface is hot to the touch, it is too hot to apply product. Do not apply product if precipitation is expected within 24-48 hours.
Spray Application: When spraying, back brush or roll to prevent sags and runs. Cover surrounding areas to protect from overspray. For airless spray, use .015” to .019” tip size for best results. Brush
Application: To minimize lapping, maintain a wet edge lengthwise and do not break in the middle of boards. One coat is sufficient for most applications. Product not absorbed into the wood within 30-60 minutes must be removed to prevent surface sheen.
THINNING RECOMMENDATIONS Thinning is not recommended.
For product information
For product specifications
For safety data sheet
Messmers UV Plus Deck Stain Wood Stain 250 VOC - 5 Gallon
Messmers Timberflex Interior - Clear - Gallon
Penofin Exotic Hardwood Stain 100 VOC - Quart
Ready Seal Natural Wood Stain & Sealer - Gallon
Messmers Timberflex Topcoat Exterior - Clear (5 Gallon)
Penofin Exotic Hardwood Stain 100 VOC - Gallon
Messmers UV Plus Deck Stain Wood Stain 250 VOC - Gallon
PPG Proluxe Cetol SRD RE Log and Siding - Gallon
Share your knowledge of this product.
Be the first to write a review »