Skip to content
Shop Our Categories
Shop by category
Stains & Finishes
Cleaners & Strippers
Exterior Stains & Finishes
Interior Stains & Finishes
Lifetime Wood Treatment
Primers & Sealers
Silicone Roof Coating
Acrylic Elastomeric Roof Coating
Aluminum Roof Coating
Roof Patch & Sealants
Stains & Finishes
Messmers UV Plus Deck Stain Wood Stain 250 VOC - 5 Gallon
Click to view another Color
Clear Weathering 499
Natural Cedar 502
Natural Pine / Fir 501
Natural Redwood 503
Natural Sequoia 504
UV Plus is a penetrating
and oil finish that beautifies and protects exterior wood, providing a natural appearance. It is ideal for use on cedar, pine and redwood and comes in a variety of tones and semi-transparent colors. UV Plus contains fungicides and UV absorbers of the highest quality. It does not form a surface film when properly applied and is not subject to peeling and flaking. To recoat, just clean and/or brighten the wood surface and reapply UV Plus. No stripping or sanding is necessary.
Product Weight: 9 lbs
Manufacturer: MESSMERS, INC.
Always clean gray or dirty wood before applying UV Plus.
Use Messmer’s WD Wood and Deck Renewer, available in liquid and powder concentrates.
Allow wood to completely dry for at least 24 to 48 hours.
Previously stained or treated wood should be sufficiently weathered to allow for complete penetration of U.V. Plus.
New redwood should be aged at least 6-8 weeks and cleaned before applying product.
Before applying, this product should be mixed thoroughly.
Ensure that all settled material on bottom of can is evenly incorporated, and intermix all containers (box them).
Apply UV Plus when surface temperatures are between 45F and 90F. If surface is hot to the touch, it is too hot to apply product.
Do not apply product if precipitation is expected within 24-48 hours.
When spraying, back brush or roll to prevent sags and runs
Cover surrounding areas to protect from overspray
For airless spray, use .015” to .019” tip size for best results.
To minimize lapping, maintain a wet edge lengthwise and do not break in the middle of boards.
One coat is sufficient for most applications.
Product not absorbed into the wood within 30-60 minutes must be removed to prevent surface sheen.
Thinning is not recommended.
For extended information on this product
For product specifications on this product
For safety data sheet on this product
Penofin First Step Prep Cleaner for Hardwood
PPG Proluxe Cetol SRD RE Log and Siding - Gallon
Messmers UV Plus Deck Stain Wood Stain - 5 Gallon
Penofin Blue Label Exterior Stain 550 VOC - 5 Gallon
Messmers UV Plus Deck Stain Wood Stain 100 VOC - Gallon
Penofin Red Label Exterior Penetrating Oil Finish - 550 VOC - Quart
PPG Proluxe Cetol SRD (NL) Log and Siding - Gallon
Messmers Timberflex Topcoat Exterior - Clear (5 Gallon)
Share your knowledge of this product.
Be the first to write a review »