Acu-Epoxy Prime Kit
Acu-Epoxy Prime  Kit

Our Price: $499.99

Product Code: ES-EPA-B


Acu-Epoxy Prime Part A & B

Acu-EpoxyPrime is a water-based, two part general purpose epoxy primer.

Acu-EpoxyPrime adheres well to metal, asphalt, modified bitumen, concrete, spray foam, single-plys and other surfaces. It may also be used as a masonry block filler.

Flammability: Non-flammable

Topcoat Time: Topcoat can be applied as soon as primer has thoroughly set, normally 2 to 3 hours after application (dependent upon temperature and humidity). It can be topcoated for up to 7 days. After 7 days surface must be cleaned and re-primed prior to topcoat application.

Weatherability: Chalk resistance is poor. Durability without topcoat is only fair. Not intended for continuous exposure, without an adequate top coating.

Adhesion: Excellent adhesion at recommended application rates. Exceeding recommended application rates may result in reduced adhesive strength.

Hardness: Achieves maximum hardness in 7 days at 60oF to 80oF.
Dry/ Cure Time: Dry to touch in 1 hour or less; depending on temperature and humidity. Cure time

is 24 hours.

Pot Life: 2 hours at 75oF. Pot life at 55o F is doubled, however at 100o F it is reduced to 45 min. or less. Do not used material that has been mixed for four hours or more.

Color: Part A is white. Part B is black to dark grey. The combined product is medium grey.

ORDERING INFORMATION: This product is sold in 10-gallon kits parts A and B. When combined the two parts produce a thick, heavy body coating which is easily spread.

Clean Up: Clean up with soap and water or a small quantity of distilled vinegar

For extended information on this product CLICL HERE

For Material Safety Data Sheet: Part A & PartB

Share your knowledge of this product. Be the first to write a review »